Wenko Milazzo Vacuum-Loc Toilet Paper Holder

Easy to mount system without drills, screws, nails, or glue: before you start, make sure the adhesive surface is clean, position the tissue paper holder on your preferred surface, suck out the air with the supplied pump to create a vacuum, and immediately load the toilet paper holder! Reposition the toilet paper dispenser as often as you want: if you have misplaced the position in which you put it or you are in the middle of a bathroom renovation, just effortlessly detach and smoothly reposition the toilet paper holder without leaving any residue behind! Heavy-duty toilet roll holder that never fails: the tissue paper dispenser is an easy solution for avoiding holes and glue on your walls, it ensures a long-lasting secure hold and conjugates elegance and simplicity, making it essential for every bathroom! Features: Size : 13,5 x 16 x 17,5 cm Material:Metal - steel Vacuum-Loc- A system offers reliable fixing without drilling you can remove and placed it again and again without leaving residue or marks 1.Cleaning the adhesive surface The selected surface must first be cleaned with a clean, damp cloth. Here it is important that the subsurface is completely dry and above all free from grease when mounting. Therefore, bathroom or household cleaning agents should not be used for pre-cleaning. For best results, clean the mounting area with cleaning alcohol. 2.Fixing the vacuum adapter To attach to the desired surface, simply remove the cap on the front and the protective film of the back of the vacuum adapter. Please ensure that the small arrow is pointing down vertically (in the case of the towel rail, both arrows must point horizontally inwards). 3.Generating a vacuum Press the pump against the Loc and pull out the pump piston until a loud plop is heard. Remove the pump from the Loc, attach the pump piston again and repeat the procedure 3 times. Secure fixing works so easily with the Vacuum suction system from WENKO. 4.Can be immediately subjected to loads After the fourth time of applying the pump piston, the adapter can be immediately subjected to loads and the desired accessory can be hung on. To disassemble, simply press sideways on the valve, thus releasing the vacuum.